A whole house water filter system that is designed for iron removal is the best way to remove ferrous iron from water. The water filter you choose will depend on the level of iron you need to remove. For some homes, a Clearwater Systems whole-house water softener can handle iron removal. However, when iron levels are elevated (usually above 0.3 mg/liter), an additional Clearwater Systems iron water filter may be necessary.
Why is Iron Present in Your Water?
Underground, where water is not exposed to oxygen, it is common to find large concentrations of iron deposits in the ferrous state. Even though the water containing this ferrous iron appears perfectly clear and colorless, when it is exposed to the air, oxygen converts it to the ferric state. This ferric iron often reacts with water’s alkalinity, forming ferric hydroxide, a brown gelatin that causes staining. This can be a common well water issue.
Municipal water lines can corrode, and this may add iron to water. This iron can be either in the soluble ferrous state or the insoluble ferric hydroxide state. You may notice staining from ferric hydroxide or because other organic compounds react with the iron in your water and form chelated compounds that present unusual staining problems. Bacteria that metabolize iron causes another staining problem associated with iron, and form corrosion on pipes that results in heavy gelatinous masses that can plug pipes or look like slugs in your water. If you notice brown slimy masses on the surface of the water in your toilet, you may have iron bacteria.
Water filtration systems remove dissolved ferrous iron by ion exchange, and they remove ferric iron by filtration. It is essential to remove the ferric hydroxide periodically from the water softener bed because it can cause clogs that reduce the effectiveness of the ion exchange. Make sure your whole house water softener uses automatically dispensed cleaning agents to remove the iron from the bed.
A whole house iron water filter system designed specifically for iron removal should allow for special and extended backwashing of the bed and a faster final rinse to prevent slugs from forming.
Why Use a Whole House Iron Water Filter System
Eliminate stains, metallic taste, and corrosion with an Iron Water Filtration System.
Iron is not hazardous and is classified by The U.S. Department of Natural Resources as a secondary or “aesthetic” water contaminant. However, high levels of iron also:
- Dramatically affect the taste and smell of water.
- Stain laundry and household fixtures such as showers, tubs, and sinks.
- Contribute to hard-water effects that may shorten the life of appliances like dishwashers and hot water tanks.
The last step before purchasing any iron water filter is to get a qualified water analysis from a dependable source like Clearwater Systems to determine the proper technology to guarantee total iron removal. Contact Clearwater Systems to schedule a free water analysis.